Brunox epoxy rust kill brush on - Pacer
Directions: Remove loose rust, grease, dirt and paint residues with a wire brush or grinding wheel. Thoroughly clean the affected area. Apply 2-3 coats by brush on the rust pores adhering to recommended drying times between coats. When completely dry a top coat must then be applied.
* Free from heavy metals and mineral acid
* Penetrates approx. 7-10 times deeper into the rustpores than ordinary rust converter emulsion products
* Can be appled with an airless or by high pressure air gun (can be thinned up to 8% with Acetone)
* Compatible with commercially available top coats
CAUTION: CLASS 3 FLAMMABLE